Tips & Trick - My friend passed her/ his used monitor to me as I just had a new born. How should I set up the camera? - RM5752 / RM5762 Series

Tips & Trick - My friend passed her/ his used monitor to me as I just had a new born. How should I set up the camera? - RM5752 / RM5762 Series

This means on top of relocating the camera and using a different Wi-Fi® network, the camera also pairs with a new mobile app account.

TIP

For best practice, remind your friend to back up her/ his data prior your new set up. This is to prevent any data loss.

Now, you can...

Set up the new Network for both the Camera and the Parent Unit/ Viewer
1. Check if the new location has good Wi-Fi® signal strength. Refer to the Test the location for the camera unit.
2. Plug your camera to the power supply.

3. Press  on the parent unit in idle. Press ,,, orto select Network setting , and then press  to confirm.

3. Press  or  to select Change network & pair CAM, and then press .
4. Press  or  to choose a password-protected 2.4GHz Wi-Fi network for the parent unit/viewer, then press .

5. Follow the on-screen instructions to add the camera to the parent unit/viewer.

After the Camera and the Parent Unit are linked, you can set up your MyVTech Baby 1080p mobile app
1. Download and install the MyVTech Baby 1080p mobile app.
2. Run the app, and then add the camera to your account. See Add a camera.

I want the monitor to detect my baby's motion. How should I set in the Parent Unit?

You have to turn on the Motion Detection in the Parent Unit.
1. Press MENU/SELECT.
2. Press v to scroll to Motion detection, and then press MENU/SELECT.
3. Press MENU/SELECT again to select Set On/Off.
4. Press v to scroll to On, and then press MENU/SELECT.

I can't add the camera with the parent unit nor the mobile app. What should I do? - RM5762

You should make sure...

• Both your camera and parent unit are switched on.
• Your camera unit and parent unit should be connected.
• The parent unit or mobile device connects to the same Wi-Fi® network that your camera uses.
• You have selected the correct camera unit. Compare the last four characters of the camera's WIFI MAC (located on the bottom of the camera) to the camera listed in the app.

How to change your router settings?

Access the configuration page of your router

To do this, type any of the following into your browser’s URL address bar:
• 192.168.0.1
• 192.168.1.1
• 192.168.2.1

TIP

If this is your first time accessing your router’s configuration page, you will be required to enter a username and a password. Usually the default credentials will be:

username: admin | user | 1234

password: admin | user | 1234

Check the label at the bottom of your router as at times the default credentials are printed there.

Change wireless settings at router's administration desk

After you correctly entered your username and password, you will arrive at your router’s administration desk, where you will be able to change its wireless settings.

To change the wireless security settings, select Wireless > Security > Encryption. You can select WEP or WPA Personal encryption.

  NOTE

WEP encryption offers the least security and WPA2 personal encryption offers more security.

https://vtech.zendesk.com/