VM5261 baby monitor system
- Connect and power on – Baby unit
- Positioning – Baby unit
- Install the battery
- Connect and power on – Parent unit
CAUTION
The default volume of your parent unit is level 4, and the maximum volume is level 7. If you experience high-pitched screeching noise from your baby monitor while positioning:- Make sure your baby unit and parent unit are more than 3 feet (1 meter) apart, OR
- Turn down the volume of your parent unit.
- Status check
Once you power on both your baby unit and parent unit, your parent unit displays image from the baby unit, and the LINK LED light turns on. The ON/OFF LED light of the baby unit also turns on.
Overview – Parent unit
Overview – Baby unit
Install the lens (optional)
The wide-angle lens (VM101) provided allows you to view more of your baby’s room from the parent unit screen.
If you do not use the lens at the moment, cover both sides of the lens with the lens cover provided to avoid scratches.
Basic operation – Parent unit
Press 
VOL / VOL
to adjust your parent unit
speaker volume. It determines the volume of sound
transmitted from your baby units.
Pan, tilt, zoom
Press and hold 
,
, 
or 
to move the camera
Press 
to zoom in or out
Talk to your baby unit
Press and hold TALK and speak to your parent unit. Your voice is transmitted to the baby unit.
Turn off the screen
Press and hold LCD ON/OFF to switch off the screen. You can still hear sound from the selected baby unit.
TIP
- Press any keys on the parent unit to turn on the screen again
Use the menu
Press MENU/SELECT to enter the menu, choose a menu item, or save a setting. You can use the parent unit for advanced settings or operations, such as to play or stop the baby unit lullaby, or to adjust the baby unit sound sensitivity.
While in the main menu:
- Press or to scroll up or down.
- Press to select an item.
- Press to return to the main menu or idle screen.
Turn off the parent unit
Press and hold POWER to power off your parent unit.
https://manuals.plus/vtech/baby-monitor-manual-5#ixzz7qdXclM8G